This section describes the user tools in the Preset Stamp menu under [Stamp].
Stamp Language
You can select the language of the message printed in Preset Stamp mode.
English, German, French, Italian, Spanish, Dutch, Portuguese, Polish, Czech, Swedish, Finnish, Hungarian, Norwegian, Danish, Russian, Japanese, Simplified Chinese, Traditional Chinese, Hangul, Catalan, Turkish, Greek, Brazilian Portuguese
Default: [English]
Stamp Priority
You can select the stamp type given priority when [Preset Stamp] is pressed.
Default: [COPY]
Stamp Format
Specify how each of stamps is printed.
Stamp Position
Specify where to print the stamp. For details about the stamp position, see Stamps.
Default: [Top Right]
Adjust Stamp Position
You can adjust the position in which the stamp is printed.
The position where the stamp is printed and the range within which that position can be adjusted are shown in the following table. The values for defaults and possible ranges given in the table are the distance from each side of the paper.
(mainly Europe and Asia)
Stamp positions |
Default |
Possible range |
---|---|---|
Top Left |
24 mm from the left edge 24 mm from the top edge |
From 4 to 144 mm from the left edge From 4 to 144 mm from the top edge |
Top Center |
Center 24 mm from the top edge |
From 0 to 72 mm to the right or left of the center From 4 to 144 mm from the top edge |
Top Right |
24 mm from the right edge 24 mm from the top edge |
From 4 to 144 mm from the right edge From 4 to 144 mm from the top edge |
Center Left |
24 mm from the left edge Center |
From 4 to 144 mm from the left edge From 0 to 72 mm to the toward the top or bottom of the center |
Center |
Center |
From 0 to 72 mm to the toward the top or bottom of the center From 0 to 72 mm to the right or left of the center |
Center Right |
24 mm from the right edge Center |
From 4 to 144 mm from the right edge From 0 to 72 mm to the toward the top or bottom of the center |
Bottom Left |
24 mm from the left edge 24 mm from the bottom edge |
From 4 to 144 mm from the left edge From 4 to 144 mm from the bottom edge |
Bottom Center |
Center 24 mm from the bottom edge |
From 0 to 72 mm to the right or left of the center From 4 to 144 mm from the bottom edge |
Bottom Right |
24 mm from the right edge 24 mm from the bottom edge |
From 4 to 144 mm from the right edge From 4 to 144 mm from the bottom edge |
(mainly North America)
Stamp positions |
Default |
Possible range |
---|---|---|
Top Left |
1.0 inch from the left edge 1.0 inch from the top edge |
From 0.1 to 5.7 inches from the left edge From 0.1 to 5.7 inches from the top edge |
Top Center |
Center 1.0 inch from the top edge |
From 0 to 2.8 inches to the right or left of the center From 0.1 to 5.7 inches from the top edge |
Top Right |
1.0 inch from the right edge 1.0 inch from the top edge |
From 0.1 to 5.7 inches from the right edge From 0.1 to 5.7 inches from the top edge |
Center Left |
1.0 inch from the left edge Center |
From 0.1 to 5.7 inches from the left edge From 0 to 2.8 inches to the toward the top or bottom of the center |
Center |
Center |
From 0 to 2.8 inches to the toward the top or bottom of the center From 0 to 2.8 inches to the right or left of the center |
Center Right |
1.0 inch from the right edge Center |
From 0.1 to 5.7 inches from the right edge From 0 to 2.8 inches to the toward the top or bottom of the center |
Bottom Left |
1.0 inch from the left edge 1.0 inches from the bottom edge |
From 0.1 to 5.7 inches from the left edge From 0.1 to 5.7 inches from the bottom edge |
Bottom Center |
Center 1.0 inch from the bottom edge |
From 0 to 2.8 inches to the right or left of the center From 0.1 to 5.7 inches from the bottom edge |
Bottom Right |
1.0 inch from the right edge 1.0 inch from the bottom edge |
From 0.1 to 5.7 inches from the right edge From 0.1 to 5.7 inches from the bottom edge |
Size
You can select the size of the stamp.
Default: [1 X]
Density
You can select the pattern used to print the stamp.
Default: [Normal]
Normal
The stamp is printed on the image. You cannot check which parts will overlap.
Lighter
The image can be seen through the stamp.
Lightest
The image appears even clearer than in the Lighter setting.
Page to Stamp
You can have the stamp printed on the first page or all pages.
Default: [All Pages]
For details about how to change the Copier / Document Server Features, see "Accessing User Tools", Connecting the Machine/ System Settings.