Skip header
 

Interrupt Copy

Use this function if you want to interrupt a long copy job to make urgently needed copies.

Important

  • You cannot use the Interrupt Copy function when fax originals are being scanned.

  • You cannot use the Staple function with this function if another copy job is already using the Staple function.

1Press [Interrupt mode].

2Remove the originals that were being copied.

3Place the originals you want to copy.

4Press [Start].

The machine starts making copies.

5When copying is complete, remove the originals and copies.

6Press [Interrupt mode].

7Replace the originals that you were copying, and then press [Start].

Follow the instructions on the screen.

Note

  • The previous copy job settings are restored. Simply press [Start] to continue copying from where it left off.