Start Date/Time
The event start date and time is recorded.
End Date/Time
The event end date and time is recorded.
Log Type
The type of eco-friendly log is recorded.
Power ON, Power OFF, Status of Power, Job Information or Consumption of Paper is recorded.
Log Result
Whether an event has completed or not is displayed.
If an event has completed, "Completed" is recorded. Otherwise, "Failed" is recorded.
Result
The result of the event is recorded.
If an event is successful, "Succeeded" is recorded. If it fails, "Failed" is recorded.
Log ID
Identifies the ID that is assigned to the log. This is a hexadecimal ID that identifies the log.
Power Mode
The power status of the printer (after state transition) is logged.
Value |
Content |
---|---|
Standby |
Standby status |
Low Power |
Low power status |
Silent |
Silent status |
HDD On |
HDD on status |
Engine Off |
The engine is stopped. |
Controller Off |
The controller is stopped. |
STR |
STR state (Suspend to RAM) |
Silent Print |
Silent print status |
Low Power Print |
Low power print status |
Fuser Unit Off |
Fusing unit off status |
Log Type
The type of job log is recorded.
Job Interval (seconds)
The elapsed time from the start of the previous job until the start of the job is recorded.
Job Duration (seconds)
The elapsed time from the start of a job until its end is recorded.
Paper Usage (Large Size)
Indicates the number of one-sided prints per hour on large paper.
Large size means A3 (11 × 17 inches) or larger.
Paper Usage (Small Size)
Indicates the number of one-sided prints per hour on small paper.
Small size means smaller than A3 (11 × 17 inches).
Paper Usage (2 Sided: Large Size)
Indicates the number of two-sided prints per hour on large paper.
Large size means A3 (11 × 17 inches) or larger.
Paper Usage (2 Sided: Small Size)
Indicates the number of two-sided prints per hour on small paper.
Small size means smaller than A3 (11 × 17 inches).
Detected Power
The power consumption status of the printer is measured and registered in the log while the printer is being used.
Value |
Content |
---|---|
Controller Standby |
Controller standby mode |
STR |
Suspend to RAM (STR) mode |
Main Power Off |
The main power is turned off. |
Printing |
Printer's printing status |
Engine Standby |
The engine is on standby. |
Engine Low |
Engine low status |
Engine Night |
The engine is in the silent state. |
Engine Total |
The printer's total electricity consumption. |
Fuser Unit Off |
Fusing unit off status |
Power Consumption(Wh)
Indicates the power consumption in each power state.