Previous
The print volume counter can be reset at a specified time.
When Central Management is enabled and "Print Volume Use Limitation" is set to [Manage Centrally] on the management server, the setting on the management server is used on the management server and managed clients.
Options |
Details |
|---|---|
Every Month |
Resets the print volume at the specified time/date each month. |
Specify Date |
Resets the print volume (only once) at the specified time/date. |
Specify Cycle |
Resets after the specified interval from a reference date, then resets thereafter at the same interval. |
Log in as the machine administrator from Web Image Monitor.
Point to [Device Management], and then click [Configuration].
Click [Print Volume Use Limitation] under "Device Settings".
Select one of [Every Month], [Specify Date], and [Specify Cycle] in the "Volume Use Counter: Scheduled/Specified Reset Settings" list.
Configure the conditions.
Click [OK].
Log out.
If the printer is turned off at the specified time, the print volume will be reset when the power is turned on thereafter.
If you select in [Every Month] a date, such as the 31st, which is missing on some months, the print volume will be reset at 12:00 am on the 1st of the month following such a month.
