Previous
Configuration:
Desktop
Print process:
Laser beam scanning and electro-photographic printing
First print speed:
6 seconds
Print speed:
Type 1: 50 pages per minute (A4
), 52 pages per minute (81/2 × 11)Type 2: 60 pages per minute (A4
), 62 pages per minute (81/2 × 11)
Resolution:
1200 × 1200 dpi
600 × 600 dpi
Paper size:
For details, see Paper Size Specifications.
Paper weight:
For details, see Paper Type Specifications.
Paper output capacity:
Standard 500 sheets (80 g/m2, 20 lb. BOND)
Paper input capacity:
Tray |
Paper capacity*1 |
|---|---|
Standard paper feed tray |
500 sheets |
Bypass tray |
100 sheets |
500-sheet paper feed unit |
500 sheets |
*1 Paper weight: 80 g/m2 (20 lb. BOND)
Power requirements:
(mainly Europe and Asia)220–240 V, 50/60 Hz, 6 A
(mainly North America)120–127 V, 60 Hz, 11 A
Power consumption:
- (mainly Europe and Asia)
Main unit only
Type 1
Type 2
Ready
80.4 W
75.1 W
During printing
626 W
742 W
Maximum
1,400 W
1,400 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Type 1
Type 2
Maximum
1,400 W
1,400 W
The complete system consists of the main unit, four 500-sheet paper feed units, the wireless LAN interface board.
- (mainly North America)
Main unit only
Type 1
Type 2
Ready
68.6 W
59.2 W
During printing
688 W
729 W
Maximum
1,400 W
1,400 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Type 1
Type 2
Maximum
1,400 W
1,400 W
The complete system consists of the main unit, four 500-sheet paper feed units, the wireless LAN interface board.
Warm-up time (23 °C (73.4 °F), rated voltage):
Type 1: 21 seconds
Type 2: 25 seconds
Dimensions:
420 × 410 × 345 mm (16.6 × 16.2 × 13.6 inches)
Weight:
Approx. 18 kg (40 lb.)
Noise emission:
Sound power level:
Main unit only
Type 1
Type 2
Stand-by
29.1 dB (A)
29.0 dB (A)
Printing
67.5 dB (A)
69.6 dB (A)
Complete system
Type 1
Type 2
Stand-by
30.7 dB (A)
29.9 dB (A)
Printing
70.5 dB (A)
70.1 dB (A)
Sound pressure level:
Main unit only
Type 1
Type 2
Stand-by
19.3 dB (A)
19.3 dB (A)
Printing
56.9 dB (A)
58.5 dB (A)
Complete system
Type 1
Type 2
Stand-by
19.9 dB (A)
19.4 dB (A)
Printing
57.4 dB (A)
57.0 dB (A)
Sound power levels and sound pressure levels are actual values measured in accordance with ISO 7779.
Sound pressure levels are measured from the position of the bystander.
The complete system consists of the main unit, four 500-sheet paper feed units, and the caster table.
Memory:
Standard 2 GB
Hard disk:
320 GB
Interfaces:
Standard:
Gigabit Ethernet (10BASE-T/100BASE-TX/1000BASE-T)
USB 2.0
To use USB 2.0, a USB computer port and cable that support USB 2.0 are required.
USB Host
SD card slot
Optional:
IEEE 802.11a/b/g/n (Wireless LAN)
Parallel (Bidirectional IEEE 1284)
USB device server (10BASE-T/100BASE-TX/1000BASE-T)
Printer Language:
PCL5e/6, PostScript 3, PDF, XPS, IPDS
Fonts:
PCL 5e/PCL 6:
45 fonts, 13 International fonts
PostScript 3, PDF:
136 fonts
IPDS:
108 fonts
Network:
Topology: The physical or logical layout of the nodes (devices) in a network (10BASE-T/100BASETX/1000BASE-T)
Protocol: TCP/IP (IPv4, IPv6)
Warm-up time may differ depending on the conditions and environment of the printer.
