|
|
|
|
|
|
|
|
|
|
|
|
Waste toner bottles cannot be reused.
Before removing the waste toner bottle from the machine, spread paper or some other material around the area to keep toner from dirtying your workspace.
When removing the waste toner bottle, do not touch the inside of the machine.
Be careful to not allow the toner to leak from the waste toner bottle when you remove it.
Carefully pull the waste toner bottle out horizontally when you are replacing it.
Do not use a waste toner bottle that has not been used for a long time.
Take care not to drop the waste toner bottle.
Make sure the waste toner bottle is fully inserted. If it is not, toner will leak inside the machine.
We recommend purchasing and keeping a spare waste toner bottle on hand since waste toner bottles are consumable items.
Open the left cover.
Remove the waste toner bottle from the printer.
Put the full waste toner bottle in a plastic bag and seal it so that the toner does not spill out.
Remove the new waste toner bottle from the toner kit.
Insert the new waste toner bottle into the printer
Leave the cap open.
Press the new waste toner bottle it clicks into place.
Close the left cover.
Replace the waste toner bottle if "Waste Toner full" appears on the display.
When the "Waste Toner almost full" appears on the display, the waste toner bottle should be replaced soon. Prepare a new waste toner bottle.
Your service representative can replace the waste toner bottle if it is included in your contract. For details, contact your local dealer or service representative.