Previous
The table below shows the list of setting items. For details about their functions, see Quality Maintenance.
Image Density Adjustment |
-2 to 2 Default: 0 |
|
Registration |
Print Test Sheet |
Tray 1, Tray 2, Tray 3, Tray 4, Tray 5, Bypass Tray, Duplex Unit |
Registration |
Adjustment |
Horizontal: Tray 1, Horizontal: Tray 2, Horizontal: Tray 3, Horizontal: Tray 4, Horizontal: Tray 5, Horizontal: Bypass Tray, Horizontal: Back Side, Vertical: Tray 1, Vertical: Tray 2, Vertical: Tray 3, Vertical: Tray 4, Vertical: Tray 5, Vertical: Bypass Tray, Vertical: Back Side |
Drum Refresh |
||
Auto Drum Refresh |
Off (default), Short, Standard, Long |
|
Altitude Adjustment |
Standard (default), High 1, High 2 |
|
Charger Output |
-50V, -25V, Standard (default), +25V, +50V |
|
Add Extra Toner |
OK, Cancel |
|
Scattered Toner Prevention |
Tray 1 |
On, Off (default) |
Scattered Toner Prevention |
Tray 2 |
On, Off (default) |
Scattered Toner Prevention |
Tray 3 |
On, Off (default) |
Scattered Toner Prevention |
Tray 4 |
On, Off (default) |
Scattered Toner Prevention |
Tray 5 |
On, Off (default) |
Scattered Toner Prevention |
Bypass Tray |
On, Off (default) |
