Skip header
 

Printing from a Selected Tray

Use the following procedure to manually select the tray to continue printing.

If you want to print after supplying additional paper to a tray, be sure to load appropriate paper first, and then select the tray.

When the caution message appears, press [FormFeed], and then select setting items using the [Down arrow key] or [Up arrow key] key.

1Press [OK] Select the tray to use for form feed from the list Press [OK]

Note

  • When [Form Feed] is performed, only one copy is printed even if more than one copy is specified.

  • The printer performs [Form Feed] automatically when [Auto Continue] is enabled in the [System] menu. For details, see Executing form feed when an error occurs.