Skip header
 

Exterior: Front view

Main unit illustration numbered callout illustration

  1. Top cover

    Open to access the inside of the printer and remove jammed paper.

    Open here to replace the print cartridge.

  2. Standard tray

    Output is stacked here with the print side down.

  3. Control panel

    For details, see Guide to the Names and Functions of the Control Panel.

  4. Vents

    Prevent overheating.

  5. Paper size dial

    Use this dial to specify the paper size. To use a paper size that is not indicated on the paper size dial, set the dial to "Asterisk". If this is the case, set the paper size using the control panel.

  6. Main power switch

    Use this switch to turn the power on and off.

    For details about how to shut down the printer, see Turning Off the Power.

  7. Front cover

    Open to access the inside of the printer and remove jammed paper.

    Open here to replace the print cartridge.

  8. Tray 1

    Up to 500 sheets of plain paper can be loaded.

    For details about the sizes and types of paper that can be used, see Paper Size Specifications and Paper Type Specifications.

  9. Extender for the bypass tray

    Pull this extender out when loading A4Portrait, 81/2 × 11Portrait or larger size paper in the bypass tray.

  10. Bypass tray

    Up to 100 sheets of plain paper can be loaded.

    For details about the sizes and types of paper that can be used, see Paper Size Specifications and Paper Type Specifications.

  11. Paper guides

    When loading paper in the bypass tray, align the paper guides flush against the paper.

  12. Tray Extension

    Pull this fence to prevent paper from falling off.

PreviousNext