Previous
You can adjust the printing position. Normally you do not need to update the printing position.
However, updating is useful in some cases.
You can adjust the printing position for the following trays:
Horizontal and vertical positions for Trays 1 to 5 and bypass tray
Horizontal and vertical positions for the back side of the paper during duplex printing
Press [Home] (
) at the bottom of the screen in the center.
Flick to the left, and then press [User Tools] (
) icon.
Press [Machine Features].
Press [Maintenance].
Press [Adjust Print Position].
Press [Print Test Sheet] next to the tray which you want to adjust.
For the bypass tray, you cannot print the test sheet. Proceed to Step 9.
Press [Start Printing] to print the test sheet to preview the settings.
Use this sheet to confirm the current print position.
Select the tray you want to adjust.
Change the registered value (mm) using the number keys.
Increase the value to shift the print area in the direction indicated by the "+" symbol in the diagram below. Decrease to shift the print area in the direction indicated by the "-" symbol.
1: Print Area
2: Paper Feed Direction
Press [OK].
If you want to adjust the back side, press [
Next].
Press [Print Test Sheet] next to [Back Side].
Press [Start Printing] to print the test sheet to preview the settings.
Use this sheet to confirm the current print position.
Press [Back Side].
Use the same procedure as Step 9 to change the registered value (mm) using the number keys.
Press [OK].
Press [Exit].
Press [User Tools] (
) on the top right on the screen.
Press [Home] () at the bottom of the screen in the center.
