Skip header
 

User Code Authentication

This is an authentication method for limiting access to functions according to a user code. The same user code can be used by multiple users.

For details about specifying user codes, see "Registering a User Code", Connecting the Machine/ System Settings.

For details about specifying the user code on the printer driver or TWAIN driver, see the driver Help.

For details about specifying the LAN-Fax driver user code, see the LAN-Fax driver Help.

1Log in as the machine administrator from the control panel.

2Press [System Settings].

3Press [Administrator Tools].

4Press [Down arrow keyNext].

5Press [User Authentication Management].

Operation panel screen illustration

6Select [User Code Auth.].

If you do not want to enable user authentication, select [Off].

7In "Functions to Restrict", select the functions that you want to restrict.

Operation panel screen illustration

The selected functions are subject to User Code authentication. User Code authentication is not applied to the functions not selected.

For details about limiting available functions for individuals or groups, see Limiting Available Functions.

8To specify printer job authentication, select an item other than [Printer: PC Control].

If you do not want to specify printer job authentication, proceed to Step 13.

9Select the “Printer Job Authentication” level.

For a description of the printer job authentication levels, see Printer Job Authentication.

If you select [Entire] or [Simple (All)], proceed to Step 13.

If you select [Simple (Limitation)], proceed to Step 10.

10Press [Change] for "Limitation Range".

11Specify the range in which [Simple (Limitation)] is applied to "Printer Job Authentication".

Operation panel screen illustration

You can specify the IPv4 address range to which this setting is applied. Also, you can specify whether or not to apply the setting to the parallel and USB interfaces.

12Press [Exit].

13Press [OK].

14Press [Logout].

A confirmation message appears. If you press [OK], you will be automatically logged out.