Previous
Make editing settings.
[Erase Center / Border]
Press to erase the image from a specified width around the document and in the center of the document when the document is scanned.
If you select [Same Width], you can specify a uniform width for deletion all around the original (top, bottom, left, and right sides) or in the center. If you select [Different Width], you can specify a different width for deletion for each side.
[Reduce / Enlarge]
When scanning a bundle of mixed size originals, you can unify the size of the scanned data by using [Specify Size].
Entering values in the Reduce / Enlarge configuration screen
Specify Reproduction Ratio
Enter a value for the reproduction ratio.
To make a small adjustment to the reproduction ratio value, press [
] or [
].To make a large change to the value, press [Number keys], enter the desired value using number keys, and then press [
].To use a pre-defined reproduction ratio, press the desired ratio.
Specify Size
Press [Specify Size], and then specify the finished size of the scanned originals.
To select [Custom Size] for the finished size of the scanned originals, enter the value of [Short Edge] and [Long Edge] of the scan size using the number keys.
[High Compression PDF] cannot be selected if the [Reduce / Enlarge] function is used.
For details about how to edit the pre-defined reproduction ratio, see Scan Settings.
(mainly North America)
[Reduce / Enlarge] and [Erase Center / Border] cannot be specified if [LT/LG Mixed Sizes] is used.
