Configuration:
Desktop
Hard disk
320 GB
Photosensitivity type:
Amorphous Silicon (a-Si) drum
Original scanning:
One-dimensional solid scanning system through CCD
Copy process:
Laser beam scanning and electro-photographic printing
Development:
Monocomponent jumping development system
Fusing:
Roller fusing system
Resolution:
Scanning originals: 600 dpi
Copying: 600 dpi
Exposure glass:
Stationary original exposure type
Original reference position:
Rear left corner
Warm-up time (23 °C (73.4 °F), rated voltage)
(mainly Europe)
Type 1: 60 seconds*1
Type 2: 60 seconds*1
(mainly Asia)
Type 1: 24 seconds*1
Type 2: 25.4 seconds*1
(mainly North America)
Type 1: 24 seconds*1
Type 2: 25.4 seconds*1
*1 The warm-up time may differ depending on the conditions and environment of the machine.
Originals:
Sheet, book, three-dimensional object
Maximum original size:
(mainly Europe and Asia)
A4
(mainly North America)
81/2 × 14
Paper size:
Paper trays and the bypass tray:
For details, see Recommended Paper Sizes and Types.
Duplex:
A4, A5
, B5 JIS
, 81/2 × 14
, 81/2 × 13
, 81/2 × 11
, 81/4 × 14
, 81/4 × 13
, 8 × 13
, 8 × 10
, 71/4 × 101/2
, 51/2 × 81/2
, 16K
, 81/2 × 132/5
Duplex (custom size):
Vertical: 210.0–356.0 mm (8.27–14.0 inches)
Horizontal: 139.7–216.0 mm (5.50–8.50 inches)
Paper weight:
Paper trays and the bypass tray: For details, see Recommended Paper Sizes and Types.
Duplex: 64–120 g/m2 (17 lb. Bond–44 lb. Cover)
Missing image area (Copier):
For details, see Missing image area.
First copy time:
Type 1: 7 seconds (A4, 81/2 × 11
)
Type 2: 7 seconds (A4, 81/2 × 11
)
First print time:
6 seconds
Copy/print speed:
Type 1: 50 sheets/minute (A4) , 52 sheets/minute (81/2 × 11
)
Type 2: 60 sheets/minute (A4) , 62 sheets/minute (81/2 × 11
)
Reproduction ratio:
(mainly Europe and Asia)
Preset reproduction ratios (%):
Enlargement: 200, 141
Full size: 100
Reduction: 93, 71, 50
(mainly North America)
Preset reproduction ratios (%):
Enlargement: 155, 129
Full size: 100
Reduction: 93, 78, 65
Zoom: From 25–400% in increments of 1%
Maximum continuous copy run:
999 sheets
Paper capacity (80 g/m2, 20 lb. Bond):
For details, see Recommended Paper Sizes and Types.
Power requirements:
(mainly Europe and Asia)
220–240 V, 6 A, 50/60 Hz
(mainly North America)
120–127 V, 11 A, 60 Hz
Power consumption
(mainly Europe and Asia)
Main unit only
Type 1 |
Type 2 |
|
---|---|---|
Ready |
90.7 W |
88.6 W |
During printing |
624 W |
771 W |
Maximum |
1500 W |
1500 W |
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Weekly Timer is a function that allows you to set the time to switch to and recover from Sleep mode or Off mode as an event each day. By using the Weekly Timer to set to Off mode as a daily event, the power will be turned off automatically and can provide energy consumption of 1W or less. In order to change the settings, see "Timer Settings", Connecting the Machine/ System Settings. When the Weekly Timer is set to Off mode as a daily event, the network function is disabled, thus the factory-set default value for the Weekly Timer is [Inactive].
Complete system
Type 1 |
Type 2 |
|
---|---|---|
Maximum |
1500 W |
1500 W |
The complete system consists of the main unit, four 500-sheet paper feed units, and wireless LAN board.
(mainly North America)
Main unit only
Type 1 |
Type 2 |
|
---|---|---|
Ready |
50.1 W |
116 W |
During printing |
740 W |
774 W |
Maximum |
1500 W |
1500 W |
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Weekly Timer is a function that allows you to set the time to switch to and recover from Sleep mode or Off mode as an event each day. By using the Weekly Timer to set to Off mode as a daily event, the power will be turned off automatically and can provide energy consumption of 1W or less. In order to change the settings, see "Timer Settings", Connecting the Machine/ System Settings. When the Weekly Timer is set to Off mode as a daily event, the network function is disabled, thus the factory-set default value for the Weekly Timer is [Inactive].
Complete system
Type 1 |
Type 2 |
|
---|---|---|
Maximum |
1500 W |
1500 W |
The complete system consists of the main unit, four 500-sheet paper feed units, and wireless LAN board.
Dimensions:
475 × 504 × 645 mm (18.8 × 19.9 × 25.4 inches)
Space for main unit (W × D):
475 × 648.8 mm (18.8 × 25.6 inches) (including paper trays and bypass tray)
Noise emission
Sound power level:
Main unit only
Type 1 |
Type 2 |
|
---|---|---|
Stand-by |
29.7 dB (A) |
29.8 dB (A) |
Copying |
68.1 dB (A) |
69.4 dB (A) |
Complete system
Type 1 |
Type 2 |
|
---|---|---|
Stand-by |
30.4 dB (A) |
30.3 dB (A) |
Copying |
73.3 dB (A) |
74.7 dB (A) |
Sound pressure level:
Main unit only
Type 1 |
Type 2 |
|
---|---|---|
Stand-by |
19.2 dB (A) |
19.0 dB |
Copying |
58.5 dB (A) |
59.4 dB (A) |
Complete system
Type 1 |
Type 2 |
|
---|---|---|
Stand-by |
19.4 dB (A) |
19.3 dB (A) |
Copying |
60.6 dB (A) |
61.5 dB (A) |
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
The complete system consists of the main unit, four 500-sheet paper feed units, and the caster table.
Weight:
Approx. 28 kg (62 lb.)