Previous
When you use paper other than the standard types, specks of paper may stick on the registration roller, causing problems. Clean the registration roller if white dots appear on prints.
Clean the registration roller if printed paper becomes smeared after a paper jam is cleared.
|
Do not use chemical cleaners or organic solvents such as thinners or benzine.
Turn off the machine and unplug the power cord.
Remove all the cables from the machine.
Open the front cover with both hands carefully.
Squeeze the clip on the print cartridge and pull it out.
Wipe the registration roller with a dry cloth to remove the moisture.
Squeeze the clip on the print cartridge, and then insert it into the machine until it stops.
Close the front cover with both hands carefully.
If the front cover does not close, do not force it. Check if the print cartridge is properly installed.
Firmly insert the plug of the power cord into the wall socket. Connect all the interface cables that were removed.
Turn on the main power switch.
