[Send Settings] screen

1

Press to select the settings that are appropriate for the type of your original and the color mode.

2

Press to select a file type.

3

Press to select the resolution to scan the original.

4

Press to select the sides of the original to scan, such as one side or both sides.

5

Press to select the scanning size of the original.

6

Press to specify a file name.

7

Press to specify the density to scan the original.

You can also specify the density by touching the icon and dragging it right or left.

8

Press to select the orientation of the original.

9

Press to specify the sender.

10

Press to enter the subject of the e-mail.

11

Press to enter the main text of the e-mail.

12

Press to specify the magnification ratio for scanning the original.

13

Press to erase the image from a specified width around the document and in the center of the document when the document is scanned.

14

Press to sign and encrypt the e-mail.

15

Press to scan a large number of originals in several batches and send them together as a single job. You can place multi-page originals in the ADF.

16

Press to scan a large number of originals in several batches and send them together as a single job. Place the originals in the ADF one by one.

17

Press to divide a multi-page original into parts of a specified number of pages each, and then send the documents.

18

To switch the scan setting for additional originals to [1 Sided Original] after scanning one side of the last page of a batch of two-sided originals using the exposure glass, press [Change Setting], and then press [1 Sided Original].

19

Press this to notify the sender that the e-mail recipient has opened the e-mail.