Preset Stamp

You can select the language of the message printed in Preset Stamp mode.

• English, German, French, Italian, Spanish, Dutch, Portuguese, Polish, Czech, Swedish, Finnish, Hungarian, Norwegian, Danish, Russian, Japanese, Simplified Chinese, Traditional Chinese, Hangul, Catalan, Turkish, Greek, Brazilian Portuguese

Default: [English]

You can select the stamp type given priority when [Preset Stamp] is pressed.

Default: [COPY]

Specify how each of stamps is printed.

• Stamp Position

  Specify where to print the stamp. For details about the stamp position, see Stamps.

  Default: [Top Right]

• Adjust Stamp Position

  You can adjust the position in which the stamp is printed.

  The position where the stamp is printed and the range within which that position can be adjusted are shown in the following table. The values for defaults and possible ranges given in the table are the distance from each side of the paper.

  (mainly Europe and Asia)

  Stamp positions	Default	Possible range
  Top Left	24 mm from the left edge 24 mm from the top edge	From 4 to 118 mm from the left edge From 4 to 118 mm from the top edge
  Top Center	Center 24 mm from the top edge	From 0 to 59 mm to the right or left of the center From 4 to 118 mm from the top edge
  Top Right	24 mm from the right edge 24 mm from the top edge	From 4 to 118 mm from the right edge From 4 to 118 mm from the top edge
  Center Left	24 mm from the left edge Center	From 4 to 118 mm from the left edge From 0 to 59 mm to the toward the top or bottom of the center
  Center	Center	From 0 to 59 mm to the right or left of the center From 0 to 59 mm to the toward the top or bottom of the center
  Center Right	24 mm from the right edge Center	From 4 to 118 mm from the right edge From 0 to 59 mm to the toward the top or bottom of the center
  Bottom Left	24 mm from the left edge 24 mm from the bottom edge	From 4 to 118 mm from the left edge From 4 to 118 mm from the bottom edge
  Bottom Center	Center 24 mm from the bottom edge	From 0 to 59 mm to the right or left of the center From 4 to 118 mm from the bottom edge
  Bottom Right	24 mm from the right edge 24 mm from the bottom edge	From 4 to 118 mm from the right edge From 4 to 118 mm from the bottom edge

  (mainly North America)

  Stamp positions	Default	Possible range
  Top Left	1.0 inch from the left edge 1.0 inch from the top edge	From 0.2 to 4.6 inches from the left edge From 0.2 to 4.6 inches from the top edge
  Top Center	Center 1.0 inch from the top edge	From 0 to 2.3 inches to the right or left of the center From 0.2 to 4.6 inches from the top edge
  Top Right	1.0 inch from the right edge 1.0 inch from the top edge	From 0.2 to 4.6 inches from the right edge From 0.2 to 4.6 inches from the top edge
  Center Left	1.0 inch from the left edge Center	From 0.2 to 4.6 inches from the left edge From 0 to 2.3 inches to the toward the top or bottom of the center
  Center	Center	From 0 to 2.3 inches to the right or left of the center From 0 to 2.3 inches to the toward the top or bottom of the center
  Center Right	1.0 inch from the right edge Center	From 0.2 to 4.6 inches from the right edge From 0 to 2.3 inches to the toward the top or bottom of the center
  Bottom Left	1.0 inch from the left edge 1.0 inch from the bottom edge	From 0.2 to 4.6 inches from the left edge From 0.2 to 4.6 inches from the bottom edge
  Bottom Center	Center 1.0 inch from the bottom edge	From 0 to 2.3 inches to the right or left of the center From 0.2 to 4.6 inches from the bottom edge
  Bottom Right	1.0 inch from the right edge 1.0 inch from the bottom edge	From 0.2 to 4.6 inches from the right edge From 0.2 to 4.6 inches from the bottom edge

• Size

  You can select the size of the stamp.

  Default: [1 X]

• Density

  You can select the pattern used to print the stamp.

  Default: [Normal]

  • Normal

    The stamp is printed on the image. You cannot check which parts will overlap.

  • Lighter

    The image can be seen through the stamp.

  • Lightest

    The image appears even clearer than in the Lighter setting.

• Page to Stamp

  You can have the stamp printed on the first page or all pages.

  Default: [All Pages]