Skip header
 

You can use this function to create cover sheets by adding additional pages of different paper, or copying existing pages onto different paper.

Before using this function, select the tray for covers under [Tray Paper Settings] in User Tools. For details, see "Tray Paper Settings", Connecting the Machine/ System Settings.

Important

  • You cannot specify the bypass tray as the main sheet tray.

The Covers function includes Front Cover and Front/Back Cover.

Front Cover

This function copies the first page of an original onto paper that has been specified for covers, or places a cover sheet before the first copy page.

  • Copy

    Illustration of Front Cover

  • Blank

    Illustration of Front Cover

Front/Back Cover

This function copies the first and last pages of an original onto paper that has been specified for covers, or places a cover sheet before the first copy page and after the last copy page.

  • Copy

    Illustration of Front/Back Cover

  • Blank

    Illustration of Front/Back Cover

1Press [Cover/Slip Sheet].

Operation panel screen illustration

2Select [Copy] or [Blank] for the cover sheet.

3Press [OK].

4Select the main sheet tray that contains the paper to copy the originals.

Note

  • You cannot specify both Front Cover and Front/Back Cover at the same time.

  • The cover sheets should be the same size and orientation as the main sheets.

  • When selecting [Copy], select whether the front and back covers are copied one-sided or two-sided.

  • If [Blank] is selected, the cover will not be counted as a copy.

  • You can make a combined copy on the front cover sheet. For details about [Front Cover Copy in Combine], see Edit.

  • The settings made under [Tray Paper Settings] determine whether or not the front and back covers are duplex printed.

    • [At Mode Selected]... Settings made in the tray for covers will take priority.

    • [Full Time]... Settings made in [Paper Type] will take priority.

      For details, see "Tray Paper Settings", Connecting the Machine/ System Settings.