Skip header
 

Procedure for copying onto OHP Transparencies (classic)

1Load the paper face up in the bypass tray.

The bypass tray (Operation panel screen illustration) is automatically selected.

2Press [Sharp].

3Press [Paper Size].

4Specify the paper size, and then press [OK].

5Press [Paper Type].

6Press [OHP (Transparency)], and then press [OK] twice.

7Place the originals, and then press [Start].

Note

  • When copying onto OHP transparencies, remove copied sheets one by one.

  • For details about the sizes of OHP transparencies that can be used, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.

PreviousNext