Start Date/Time
The event start date and time is recorded.
End Date/Time
The event end date and time is recorded.
Log Type
The type of eco-friendly log is recorded.
Value |
Content |
---|---|
Main Power On |
Main power on |
Main Power Off |
Main power off |
Power Status Transition Result |
Power status transition result |
Job Related Information |
Job related information |
Paper Usage |
Paper usage |
Power Consumption |
Power consumption |
Log Result
Whether the event has ended or not is displayed.
Value |
Content |
---|---|
Completed |
Completed |
Failed |
Failed |
Result
The result of the event is recorded.
Value |
Content |
---|---|
Succeeded |
Succeeded |
Failed |
Failed |
Log ID
Identifies the ID that is assigned to the log. This is a hexadecimal ID that identifies the log.
Power Mode
The power status of the machine (after state transition) is logged.
Value |
Content |
---|---|
Standby |
Standby status |
Low Power |
Low power status |
Silent |
Silent status |
HDD On |
HDD on status |
Engine Off |
Engine off status |
Controller Off |
Controller off status |
STR |
STR status |
Silent Print |
Silent print status |
Low Power Print |
Low power print status |
Fuser Unit Off |
Fuser unit off status |
Log Type
The type of job log is recorded.
Job Interval (seconds)
Indicates the time that has elapsed from the start of the previous job to that of the present job.
Job Duration (seconds)
Indicates the time that has elapsed from the start of a job to the end of it.
Paper Usage (Large Size)
Indicates the number of one-sided prints per hour on large paper.
Large size means A3 (11 × 17 inches) or larger.
Paper Usage (Small Size)
Indicates the number of one-sided prints per hour on small paper.
Small size means smaller than A3 (11 × 17 inches).
Paper Usage (2 Sided: Large Size)
Indicates the number of two-sided prints per hour on large paper.
Large size means A3 (11 × 17 inches) or larger.
Paper Usage (2 Sided: Small Size)
Indicates the number of two-sided prints per hour on small paper.
Small size means smaller than A3 (11 × 17 inches).
Detected Power
The power consumption status of the machine is measured and registered in the log while the machine is being used.
Value |
Content |
---|---|
Controller Standby |
Controller standby mode |
STR |
Suspend to RAM (STR) mode |
Main Power Off |
The main power is turned off. |
Scanning/Printing |
Simultaneous scanning and printing |
Printing |
Machine's printing status |
Scanning |
Machine's scanning status |
Engine Standby |
Engine's standby status |
Engine Low |
Engine's low-power status |
Engine Night |
Engine's silent status |
Engine Total |
Machine's total electricity consumption |
Fuser Unit Off |
Fuser unit off status |
Power Consumption(Wh)
Indicates the power consumption in each power state.