Wireless Direct Settings
If the Wireless Direct Settings are enabled, the control panel can be used as a DHCP server. When the client on a network starts, the information such as an IP address that is required for network connection is assigned automatically.
Default: [OFF]
Configure all the following items to enable this function:
Device name
Press [RENAME DEVICE] on the top right of the screen, and then enter the name of the device connected to the client.
Group Owner Mode
Specify whether or not to enable group owner mode. When this setting is disabled, easy connection mode is enabled.
Default: [OFF]
Connection Password
Enter the password for connecting to a network.
DHCP Server IP Address
Enter the IP address of the control panel used as an access point by the client.
DHCP IP Address Range
Enter the range of the IP address assigned to the client. The IP address assigned to the client is effective for one hour.
Select Channel
Select the channel for direct connection from 1 to 11.
Default: [ch6]
Fix SSID
Specify whether to set the header text of SSID as "DIRECT-zV-" or not. If this setting is disabled, two characters between "-" are specified randomly. This setting cannot be changed if [Group Owner Mode] is enabled.
Default: [ON]