Skip header
 

Cleaning the Power Cord Plug

WARNING

  • Be sure to disconnect the plug from the wall outlet at least once a year and check for the following:

    • There are burn marks on the plug.

    • The prongs on the plug are deformed.

  • If any of the above conditions exist, do not use the plug and consult your dealer or service representative. Use of the plug could result in fire or electric shock.

  • Be sure to disconnect the power cord from the wall outlet at least once a year and check for the following:

    • The power cord's inner wires are exposed, broken, etc.

    • The power cord's coating has a crack or dent.

    • When bending the power cord, the power turns off and on.

    • Part of the power cord becomes hot.

    • The power cord is damaged.

  • If any of the above conditions exist, do not use the power cord and consult your dealer or service representative. Use of the power cord could result in fire or electric shock.

CAUTION

  • Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.

Important

  • Turn off the main power switch before unplugging the power cord. See Turning off the main power.

  • Fax files in memory are deleted an hour after you turn off the main power switch.

Note

  • After cleaning the power cord plug, make sure that the power cord is connected to the machine firmly, and then connect the plug to the wall outlet.

PreviousNext