Skip header
 

External options for Type 6 and 7 Region A icon (mainly Europe)

Illustration of external options numbered callout illustration

  1. Banner Paper Guide Tray

    Banner paper is loaded here.

  2. Lower paper tray

    Paper is loaded here.

  3. Caster table for lower paper tray

    To use the lower paper tray, attach the caster table.

  4. Lower paper trays

    Consists of two paper trays.

  5. Internal tray 2

    If you select this as the output tray, copied/printed paper or fax messages are delivered here face down.

  6. Bridge unit

    Relays paper to the finisher.

  7. Internal shift tray

    Sorts and stacks multiple sheets of paper.

  8. External tray

    If you select this as the output tray, copied/printed paper and fax messages are delivered here face down.

  9. Internal Finisher SR3130

    Sorts, stacks, and staples multiple sheets of paper.

    Copies can be punched if the optional punch unit is installed on the finisher.

  10. Internal Finisher SR3180

    Sorts and stacks multiple sheets of paper, and staples them without using staples.

  11. Booklet Finisher SR3220

    Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:

    • Finisher upper tray

    • Finisher shift tray

    • Finisher booklet tray

    Copies can be punched if the optional punch unit is installed on the finisher.

Note

  • You cannot install multiple finishers simultaneously.

  • Booklet Finisher SR3220 can be attached only if the bridge unit and lower paper trays are installed.

PreviousNext