Skip header
 

General Features

This section describes the user tools in the General Features menu under [Copier / Document Server Features].

Auto Image Density Priority

You can select whether Auto Image Density is "on" or "off" when the machine is turned off, reset, or modes are cleared.

Default for [Full Color: Photo]: [Off]

Default for [Full Color: Non-photo]: [Off]

Default for [B & W: Photo]: [Off]

Default for [B & W: Non-photo]: [On]

Original Type Priority

You can select the original type effective when the power is turned on, or modes cleared.

Default for [Full Color]: [Text / Photo]

Default for [B & W]: [Text / Photo]

Original Photo Type Priority

You can specify which original photo type has priority when you select [Text / Photo] or [Photo].

Default for [Text / Photo]: [Printed Photo]

Default for [Photo]: [Printed Photo]

Original Type Display

You can have the original types shown on the initial screen.

Default: [Display]

If you select [Hide], the screen is as below.

Operation panel screen illustration

Paper Display

You can choose to have the available paper trays and sizes shown on the initial screen.

Default: [Display]

If you select [Hide], the screen is shown as below.

Operation panel screen illustration

When you cancel [Auto Paper Select], the sizes of paper loaded in the trays are displayed.

Original Orientation in Duplex Mode

You can select the orientation of the originals when copying two-sided originals.

Default: [Top to Top]

Copy Orientation in Duplex Mode

You can select the orientation of the copies when making two-sided copies.

Default: [Top to Top]

Max. Copy Quantity

The maximum copy quantity can be entered between 1 and 999.

Default: [999 sheet(s)]

Auto Tray Switching

If you load paper of the same size in two or more trays, the machine automatically shifts to the other when the first tray runs out of paper (when [Auto Paper Select] is selected). This function is called "Auto Tray Switching". This setting specifies whether to use Auto Tray Switching or not.

Default: [With Image Rotation]

  • With Image Rotation

    Use to copy when using the Auto Tray Switching function.

  • Without Image Rotation

    Only copies with Auto Tray Switching if you load paper of the same size and in the same orientation in two or more trays. If the paper is not the same size and in the same orientation, copying is interrupted and the message that prompts you to add paper to the tray will be displayed.

  • Off

    When a paper tray runs out of paper, copying is interrupted and the message that prompts you to add paper to the tray will be displayed.

Paper Settings Screen for Bypass

You can specify whether or not to display the setting screen for paper sizes or types whenever you press [Operation panel screen illustration].

If you select [Display Automatically], the paper setting screen is displayed whenever you press [Operation panel screen illustration]. If you select [Do not Display], the paper setting screen is displayed when you press [Operation panel screen illustration] and [Sharp].

Default: [Display Automatically]

Customize Function: Copier

You can assign up to 6 frequently-used functions to the shortcut keys.

Default for "Customize Function: Copier 1": [1 sided 2 sided:TtoT]

Default for "Customize Function: Copier 2": [2 sided 2 sided]

Default for "Customize Function: Copier 3": [1 sided Comb 2 orig]

Default for "Customize Function: Copier 4": [1 sided Comb 4 orig]

Default for "Customize Function: Copier 5": [Create Margin]

Default for "Customize Function: Copier 6": [ID Card Copy]

Customize Function: Document Server Storage

You can assign up to 6 frequently-used functions for scanning documents on the shortcut keys.

Default for "Customize Function: Document Server Storage 1": [2 Sided Orig. Top to Top]

Default for "Customize Function: Document Server Storage 2": [1 sided Comb 2 orig]

Default for "Customize Function: Document Server Storage 3": [1 sided Comb 4 orig]

Default for "Customize Function: Document Server Storage 4": [1 sided Comb 8 orig]

Default for "Customize Function: Document Server Storage 5": [Create Margin]

Default for "Customize Function: Document Server Storage 6": [Off]

Note

  • For details about how to change the Copier / Document Server Features, see "Accessing User Tools", Connecting the Machine/ System Settings.