Skip header
 

Specify the paper input location to be used for printing.

Format

tray=paper input location number

Value and behavior

Specify a paper input location number. Paper is fed from the paper input location of the specified number.

Setting

Selected paper input location

1

Paper Input Location 1: Regular size portrait (Portrait) paper

2

Paper Input Location 1: Regular size landscape (Landscape) paper

3

Paper Input Location 1: Custom size paper

4

Paper Input Location 2: Regular size portrait (Portrait) paper

5

Paper Input Location 2: Regular size landscape (Landscape) paper

6

Paper Input Location 2: Custom size paper

T

Paper bypass location

Explanation

  • If the paper input location specified here is loaded with paper that cannot be used on this machine, or with paper of a size and/or type that is not supported by RTIFF, this printing option is ignored, and paper is fed from the paper input location indicated on the control panel of the machine.

  • If this printing option is specified, the settings for RTIFF Menu "1. Paper Input Location", "2. Paper Size", "U. Auto Paper Select", and "V. Auto Paper Select: Margin Tolerance" configured on the control panel of the machine are ignored.

  • If either the "paper" or "autopaper" printing option is specified at the same time as "tray", the "tray" printing option is ignored.

  • If Rotate Sort is specified in the PJL or its relevant printing option, the paper may be fed from a different paper input location than the location you have selected.

Note

  • If Auto Paper Input Switching is enabled, paper may be fed from a different paper input location than the location you have selected. In order to print on paper fed from a certain paper input location, select either "Auto" or "Off" in "4. Auto Paper Input Switching" on the RTIFF Menu, or specify the "noautotray" printing option.

  • Setting values 4, 5, and 6 can be selected only when the optional Paper Input Location 2 is attached.

PreviousNext