Skip header
 

c. Margin Adjustment for Auto Reduce

Specify an adjustment value to be applied to the paper size specified in "b. Auto Reduce" or by the "autoreduce" printing option within the range of ± 100 mm in increments of 1 mm.

Default: 0 mm

Operations

  • The paper size specified in "b. Auto Reduce" is adjusted when printing.

  • The adjusted size only affects the calculation of the reduction ratio, and does not affect the reduction judgment size.

  • An image may be enlarged in some cases, if the values calculated from the paper size and the value specified in this setting are larger than the image size.

Illustration of Margin Adjustment for Auto Reduce

  1. Paper size - adjust value [mm]

  2. Paper size + adjust value [mm]

  3. Paper size

Note

  • If a value greater than the short-edge length of the paper selected in "b. Auto Reduce" is specified, this setting is ignored.

  • If "Off" is selected for "b. Auto Reduce", and the "autoreduce" printing option is not specified, the setting is ignored.

  • If a margin correction value is specified in the "autoreduce" printing option, the setting for "c. Margin Adjustment for Auto Reduce" is ignored.

PreviousNext