Previous
Specify tolerance values to allow for the difference between the paper size and the image size within the range of ± 50% in increments of 1% when a paper input location that is appropriate for the image is selected automatically.
Default: 5%
Operations
If the tolerance is set to "10%", a paper input location is selected assuming that the paper is large enough to allow printing of an image 10% larger in size (110% overall) than otherwise determined. When it is set to "-10%", a paper input location is selected assuming that the paper only allows printing of an image 10% smaller (90% overall).
Conditions
If "Off" is selected for "U. Auto Paper Select", or "tray" and "paper" are specified in the printing option but not "autopaper", this setting is ignored.
If "tolerance" is specified in the "autopaper" printing option, this setting is ignored.
In order to automatically select a paper input location with the appropriate size paper for the input image size, specify "U. Auto Paper Select" or the "autopaper" printing option.
