Previous
Specify the size and orientation of the paper to be used for printing.
Settings
Do not Specify, A0R, A1, A1R, A2, A2R, A3, A3R, A4, B1R JIS, B2 JIS, B2R JIS, B3 JIS, B3R JIS, B4 JIS, 36 x 48R, 34 x 44R, 30 x 42R, 24 x 36, 24 x 36R, 22 x 34, 22 x 34R, 21 x 30, 18 x 24, 18 x 24R, AC, ACR, 15 x 20R, 12 x 18, 12 x 18R, DL, DLR, 9 x 12, LG, LT
Default: Do not Specify
Behavior
If paper of the size and orientation specified in this setting is not loaded in any of the paper input location, paper is fed from the paper input location displayed on the control panel.
If "Do not Specify" is selected, paper is fed from the paper input location specified in "1. Paper Input Location".
Conditions
If an item other than "Do not Specify" is selected, the setting for "1. Paper Input Location" is ignored.
If "On" is selected for "U. Auto Paper Select", this setting is ignored.
If either of "tray", "paper", or "autopaper" is specified in the printing option, this setting is ignored.
Some paper input location may not be selected.
If Auto Paper Input Switching is enabled, paper may be fed from a different paper input location than the one selected. In order to specify a paper input location, select "Auto" or "Off" in "4. Auto Paper Input Switching" or specify the "noautotray" printing option.
