Skip header
 

Configuring the Output Plotter

Match the settings configured in "6. Plotter ID" under the RPGL Menu on the machine with the plotter settings configured in the CAD application.

1Select the plotter to use for output in the CAD application.

For details about how to configure the settings, see the instruction manual of the CAD application.

2Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

3Flick the screen to the left, and then press the [User Tools] icon (Operation panel screen illustration).

4Press [Machine Features].

5Press [Printer Features].

6Press [Right arrow key].

7Press the [RPGL Menu] tab.

8Press [6. Plotter ID].

9Press [Up arrow keyPrevious] or [Down arrow keyNext] until the target plotter name appears, and then press [OK].

If you selected "7475A", "7550A", "7570A", "7575A", "7576A", "7580B", "7585B", "7586B", "7595A", or "7596A" in the CAD application, select the same plotter as the one selected in the application.

If you selected "DesignJet 600", "DesignJet 650C", "DesignJet 700", or "DesignJet 750C Plus" in the CAD application, select "RP-GL/2".

10If you selected [RP-GL/2], select the RP-GL/2 type, and then press [OK].

See the following table for the plotters selected in the CAD application and their corresponding RP-GL/2 types:

Plotter

RP-GL/2 type

Print color

DesignJet 600

Type1

Black and white

DesignJet 650C

Type2

Color

DesignJet 700

Type3

Black and white

DesignJet 750C Plus

Type4

Color

11Press [User Tools] (Operation panel screen illustration) on the top right of the screen.

12Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

Note