Previous
This section explains how you can check the machine's status and the items displayed. Depending on the options installed on the machine, some items might not be displayed.
UNIX: Use the "stat" parameter and the "rsh", "rcp", and "ftp" commands. "rsh" and "rcp" cannot be used in a Windows environment.
telnet: Use the "status" command.
Messages |
Description |
|---|---|
Adding Ink... |
Ink is being supplied. |
Adjusting... |
The machine is initializing or calibrating. |
Call Service Center |
There is a malfunction in the machine. |
Canceling Job... |
The job is being reset. |
Configuring... |
Setting is being changed. |
Cover Open: Cartridge Cover |
Cartridge Cover is open. |
Cover Open: Front Cover |
The front cover is open. |
Cover Open: Ink Collector Unit |
Ink Collector Unit Cover is open. |
Cover Open: Paper Input Cover |
Paper Input Cover is open. |
Current Job Suspended |
The current job is suspended. |
Empty: Black Ink |
The black print cartridge is almost empty. |
Empty: Cyan Ink |
The cyan print cartridge is almost empty. |
Empty: Magenta Ink |
The magenta print cartridge is almost empty. |
Empty: Yellow Ink |
The yellow print cartridge is almost empty. |
Energy Saver Mode |
The machine is in Energy Saver mode. |
Error: Ethernet Board |
An Ethernet board error has occurred. |
Error: HDD Board |
A hard disk drive board error has occurred. |
Error: Optional Font |
An error has occurred in the font file of the machine. |
Error: PDL |
An error has occurred in the page description language. |
Error: Rem. Certificate Renewal |
An error has occurred in the remote server renewal. |
Error: USB Interface |
An error has occurred in the USB interface. |
Error: Wireless Card |
There is a problem with IEEE802.11a/b/g/n interface unit or it is not supported. |
Full: Ink Collector Unit |
Ink Collector Unit is full. |
Full: Left Ink Sump |
Left Ink Sump is full. |
Full: Right Ink Sump |
Right Ink Sump is full. |
Hex Dump Mode |
It is a hex dump mode. |
In Use: Paper Input Location |
Other function is using the paper input. |
Independent-supplier Ink |
Ink that is not recommended is set. |
Jobs Suspended |
All jobs are suspended. |
Low: Black Ink |
The black ink is almost running out. |
Low: Cyan Ink |
The cyan ink is almost running out. |
Low: Magenta Ink |
The magenta ink is almost running out. |
Low: Yellow Ink |
The yellow ink is almost running out. |
Malfunction: Paper Input 1 |
Paper Input 1 is not available due to cutter error. |
Malfunction: Paper Input 2 |
Paper Input 2 is not available due to cutter error. |
Mismatch: Paper Size |
Indicated paper input does not contain paper of selected size. |
Mismatch: Paper Size and Type |
Indicated paper input does not contain paper of selected size and type. |
Mismatch: Paper Type |
Indicated paper input does not contain paper of selected type. |
Nearly Full: Ink Collector Unit |
Waste fluid tank is nearly full. |
Nearly Full: Left Ink Sump |
Left Ink Sump is nearly full. |
Nearly Full: Right Ink Sump |
Right Ink Sump is nearly full. |
No Paper: Selected Paper Input |
There is no paper in specified paper input. |
Not Detected: Black Ink |
Black print cartridge is not correctly set. |
Not Detected: Cyan Ink |
Cyan print cartridge is not correctly set. |
Not Detected: Magenta Ink |
Magenta print cartridge is not correctly set. |
Not Detected: Paper Input Lctn. |
There is no paper in the specified Paper Input or Paper Input is not correctly set. |
Not Detected: Yellow Ink |
Yellow print cartridge is not correctly set. |
Not Detected:Ink Collector Unit |
Ink Collector Unit is not installed or is not correctly set. |
Offline |
Machine is offline. |
Paper in Paper Bypass Location |
Paper Feed error has occurred. Remove the paper in Paper Bypass. |
Paper Misfeed: Internal |
The paper has jammed inside the machine. |
Paper Misfeed: Paper Bypass |
The paper has jammed in Paper Bypass. |
Paper Misfeed: Paper Input |
The paper has jammed in Paper Input or a paper misfeed has occurred. |
Paper Misfeed: Paper Output |
The paper has jammed in Paper Output |
Printing... |
Printing is in progress. |
Proxy User/Password Incorrect |
The proxy user name and/or password setting is incorrect. |
Ready |
The machine is ready to print. |
Released: Paper Holding Lever |
Paper Holding Lever is released. |
Renewing Remote Certificate |
The remote certificate is being renewed. |
Retarding... |
Drying operation is in progress. |
SD Card Authentication failed |
SD card authentication failed. |
Supplies Order Call failed |
The supply order call has failed. |
Warming Up... |
The machine is warming up. |
Check the error contents that may be printed in the configuration page.
