Skip header
 

Recommended Original Sizes and Weights

This section describes the sizes and weights of originals that can be placed, and missing image area.

The following regular original sizes are detected automatically:

Region A icon(mainly Europe)

Original size

Original weight

A0Portrait–A4PortraitLandscape

Maximum width that can be fed: 960 mm

Maximum size: Width 914 mm × Length 15000 mm

Minimum size: Width 210 mm × Length 210 mm

(including B1 JIS*1Portrait, B1 ISO*2Portrait, 625 × 880 mmPortrait, 440 × 625 mmLandscape)

64–190 g/m2 (17–51 lb.) and 0.090–0.2 mm thick originals

*1 JIS: Japanese Industrial Standard

*2 ISO: International Organization for Standardization

Region B icon(mainly North America)

Original size

Original weight

  • Engineering

    E (34 × 44)Portrait–A (81/2 × 11) PortraitLandscape

  • Architecture

    E (36 × 48)Portrait–A (9 × 12) PortraitLandscape

  • Other

    81/2 × 12PortraitLandscape, 81/2 × 13Portrait, 81/2 × 14Portrait, 11 × 14Portrait, 11 × 15Portrait, 12 × 141/2Portrait, 21 × 30Landscape, 30 × 42Portrait

Maximum width that can be fed: 37.8 inches

Maximum size: Width 36.0 inches × Length 590.5 inches

Minimum size: Width 8.3 inches × Length 8.3 inches

64–190 g/m2 (17–51 lb.) and 0.004–0.008 inches thick originals

If the originals are curled, use the carrier sheet or flatten the originals so that both their leading and trailing edges fit within the range shown below:

Illustration of curled originals

  1. Front curl: R 50 mm (2.0 inches) or more

  2. Back curl: R 50 mm (2.0 inches) or more

  3. Height: 20 mm (0.8 inches) or less

  4. Original feed direction