Skip header
 

Logging Out Using an IC Card

Log out from the machine by waving your IC card over the machine when Quick Card Authentication is specified.

Important

  • When waving an IC card over the machine, align the card's orientation to the mark displayed on the label.

  • Wave only one IC card over the machine at a time.

1Wave your IC card over the label showing where the NFC card reader is.

The label is on the right in the back of the control panel.

You will log out from the machine.

Note

  • You can also log out from the machine by pressing [Logout] in the top right corner of the screen.

  • Instead of using an IC card, you can also log out from the machine by waving over the machine a smart device equipped with a RICOH Smart Device Connector.