Skip header
 

General Features

This section describes the user tools in the General Features menu under [Copier / Document Server Features].

Auto Image Density Priority (B & W)

You can select whether Auto Image Density is "on" or "off" when the machine is turned off, reset, or modes are cleared.

Default for [Text]: [On]

Default for [Drawing]: [On]

Default for [Text / Photo]: [On]

Default for [Photo]: [Off]

Default for [Generation Copy]: [On]

Default for [Map]: [On]

Default for [Highlight Pen]: [Off]

Default for [Background Lines]: [On]

Default for [Patched Original]: [On]

Auto Image Density Priority (Full Color)

In full color mode, you can select whether Auto Image Density is "on" or "off" when the machine is turned off, reset, or modes are cleared.

Default for [Text]: [Off]

Default for [Drawing]: [Off]

Default for [Text / Photo]: [Off]

Default for [Photo]: [Off]

Default for [Generation Copy]: [Off]

Default for [Map]: [Off]

Original Type Priority

You can select the original type effective when the power is turned on, or modes are cleared.

Default for [Full Color]: [Text / Photo]

Default for [B & W]: [Drawing]

Original Photo Type Priority

You can specify which original photo type has priority when you select [Text / Photo] or [Photo].

Default for [Text / Photo]: [Printed Photo]

Default for [Photo]: [Printed Photo]

Original Type Display

You can have the original types shown on the initial copy screen.

Default: [Display]

If you select [Hide], the screen is as below.

Operation panel screen illustration

Max. Copy Quantity

The maximum copy quantity can be entered between 1 and 99.

Default: [99 sheet(s)]

Auto Tray Switching

If you load paper of the same size in two or more paper input locations, the machine automatically shifts to the other when the first paper input location runs out of paper (when [Auto Paper Select] is selected). This function is called "Auto Tray Switching". This setting specifies whether to use Auto Tray Switching or not. Paper Input Locations 1 and 2 are required for Auto Tray Switching.

Default: [With Image Rotation]

  • With Image Rotation

    Use to copy when using the Auto Tray Switching function.

  • Without Image Rotation

    Only copies with Auto Tray Switching if you load paper of the same size and in the same orientation in two or more paper input location. If the paper is not the same size and in the same orientation, copying is interrupted and the message that prompts you to add paper to the paper input location will be displayed.

  • Off

    When a paper input location runs out of paper, copying is interrupted and the message that prompts you to add paper to the paper input location will be displayed.

Paper Settings Screen for Bypass

You can specify whether or not to display the setting screen for paper sizes or types whenever you press [Operation panel screen illustration].

If you select [Display Automatically], the paper setting screen is displayed whenever you press [Operation panel screen illustration]. If you select [Do not Display], the paper setting screen is displayed when you press [Operation panel screen illustration] and [Sharp].

Default: [Display Automatically]

Note

  • For details about how to change the Copier / Document Server Features, see "Accessing User Tools", Connecting the Machine/ System Settings.