Previous
Copies by erasing a certain color in the image of the original.
When Using the Copy Application
About how to use the application's screen, see "[Copy] Screen".
When Using the Copier (Classic) Application
Press [Full Color].
Press [Edit / Color].
Press [Color].
Press [Erase Color].
Select the color to be erased.
Up to four colors can be erased at the same time.
Press [OK] twice.
Place the originals, and start scanning.
To cancel the selection, press the selected (highlighted) key.
When [Full Color] is selected, the full color counter values will increase.
The width of the color to be erased can be adjusted in five levels. When the width of the color is set to [Wider] under [Color Sensitivity] in User Tools and red has been specified, colors close to orange and purple will be erased. You can change the setting. For details, see Adjust Color Image.
