Skip header
 

Specifying a Custom Size for the Original

When copying custom size originals, specify the size of the originals.

Originals that have a vertical dimension of 210–15,000 mm (8.3–590.5 inches) and a horizontal dimension of 210–914 mm (8.3–36.0 inches) can be placed with this function. However, the size range of copy paper is limited to 210.0–15,000.0 mm (8.27–590.55 inches) vertically and 279.4–914.4 mm (11.00–36.00 inches) horizontally.

Operation panel screen illustrationWhen Using the Copy Application

Operation panel screen illustration

About how to use the application's screen, see "[Copy] Screen".

Operation panel screen illustrationWhen Using the Copier (Classic) Application

1Press [Original Settings].

Operation panel screen illustration

2Press [Custom Size Original].

3Enter the horizontal size with the number keys, and then press [Sharp].

Operation panel screen illustration

4Enter the vertical size with the number keys, and then press [Sharp].

5Press [OK] twice.

Note

  • If you do not specify the size, parts of the image may not be copied.

PreviousNext