When print jobs are canceled

“91: Error”

Printing was canceled by the auto job cancel function due to a command error.

Check that the data is valid.

“A job via the network that was not printed exists because an error occurred. It was stored as a job not printed.”

Jobs with errors were stored because an error occurred with a print job via the network while the error job storing function was enabled.

Contact your administrator to check whether the machine is connected correctly to the network. For details about how to check and print jobs stored when print configuration errors occur, see "Printing of Documents Stored When Print Configuration Errors Occur", Print.

“Collate Cancelled”

Collate was canceled.

Turn off the power, and then back on again. If the message appears again, contact your service representative.

“Receiving data failed.”

Data reception was aborted.

Resend the data.

“Sending data failed.”

The machine received a command to stop transmission from the printer driver.

Check if the computer is working correctly.

“The selected paper size is not supported. This job has been cancelled.”

Job reset is automatically performed if the specified paper size is incorrect.

Specify the correct paper size, and then print the file again.

“The selected paper type is not supported. This job has been cancelled.”

Job reset is automatically performed if the specified paper type is incorrect.

Specify the correct paper type, and then print the file again.