Skip header
 

Specify the paper tray to be used for printing.

Format

tray=paper tray number

Value and behavior

Specify a paper tray number. Paper is fed from the paper tray of the specified number.

Setting

Selected paper tray

1

Tray 1 (Roll 1): Reg(Portrait)

2

Tray 1 (Roll 1): Reg(Landscp)

3

Tray 1 (Roll 1): Custom Size

4

Tray 2 (Roll 2): Reg(Portrait)

5

Tray 2 (Roll 2): Reg(Landscp)

6

Tray 2 (Roll 2): Custom Size

T

Paper Bypass

Explanation

  • If the paper tray specified here is loaded with paper that cannot be used on this machine, or with paper of a size and/or type that is not supported by RTIFF, this printing option is ignored, and paper is fed from the paper tray indicated on the control panel of the machine.

  • If this printing option is specified, the settings for RTIFF Menu "1. Paper Tray", "2. Paper Size", "U. Auto Paper Select", and "V. Auto Paper Select: Margin Tolerance" configured on the control panel of the machine are ignored.

  • If either the "paper" or "autopaper" printing option is specified at the same time as "tray", the "tray" printing option is ignored.

  • If Rotate Sort is specified in the PJL or its relevant printing option, the paper may be fed from a different paper tray than the location you have selected.

Note

  • If Auto Tray Switching is enabled, paper may be fed from a different paper tray than the location you have selected. In order to print on paper fed from a certain paper tray, select either "Auto" or "Off" in "4. Auto Tray Switching" on the RTIFF Menu, or specify the "noautotray" printing option.

  • Setting values 4, 5, and 6 can be selected only when the optional Paper Tray 2 is attached.

PreviousNext