6. Plotter ID

Select the plotter specified in the CAD application. The actual coordinate system applied is determined according to the selected plotter.

When "RP-GL/2" is selected, you can select the type of RP-GL/2 mode.

Type1
Select this type if DesignJet 600 or equivalent can be selected in the application. Data is printed in black and white.
Type3
Select this type if DesignJet 700 or equivalent can be selected in the application. Data is printed in black and white.

Default: 7550A

"7550A" or "7580B" can be selected in Web Printing Tool.
RP-GL/2 mode is activated when RP-GL/2 is selected. If RP-GL/2 mode is not selected, the product operates in GL-GL/2 switching mode.
In "7475A", "7550A", and "RP-GL/2" the plotting origin is located in the bottom left corner of the plotting area. The plotting origin for the other plotters is in the center of the plotting area.
For details about RP-GL/2 switching and RP-GL/2 modes, see Operation Modes for RP-GL/2.
For details about how to configure the Plotter ID, see Configuring the Output Plotter.