Registering an NCP Folder

Press the [Home] key on the top left of the control panel, and press the [Address Book Management] icon on the [Home] screen.

Check that [Program / Change] is selected.

Press the name you want to register or enter the registered number using the number keys.

You can search by the registered name, user code, folder name, or e-mail address.

Press [Folder].

Press [NCP].

Select "Connection Type".

If you want to specify a folder in an NDS tree, press [NDS]. If you want to specify a folder on a NetWare server, press [Bindery].

If you have set "Connection Type" to [NDS], enter the user name followed by the name of the context where the user object is located. If the user name is "user" and the context name is "context", enter "user.context".

Specify the path.

For details about how to specify the path manually, see Locating the NCP folder manually.

For details about how to specify the path using Browse Network, see Locating the NCP folder using Browse Network.

Press [Connection Test] to check the path is set correctly.

Press [Exit].

If the connection test fails, check the settings, and then try again.

Press [Auth. Info], and then press [Next].

Press [Specify Other Auth. Info] on the right side of "Folder Authentication".

When [Do not Specify] is selected, the NCP User Name and NCP Password that you have specified in "Default User Name / Password (Send)" of File Transfer settings are applied. For details, see File Transfer.

Press [Change] under "Login User Name".

Enter the login user name, and then press [OK].

Press [Change] under "Login Password".

Enter the password, and then press [OK].

Enter the password again to confirm, and then press [OK].

Press [OK].

Press the [User Tools/Counter] key.