This section explains precautions when adding toner, how to send scanned documents when the toner has run out, and how to dispose of used toner.
|
|
|
|
|
|
|
|
|
|
|
Always replace the toner cartridge when a notification appears on the machine.
Fault may occur if you use toner other than the recommended type.
When adding toner, do not turn off the main power. If you do, settings will be lost.
Store toner where it will not be exposed to direct sunlight, temperatures above 35°C (95°F), or high humidity.
Store toner horizontally.
Do not shake the toner cartridge with its mouth down after removing it. Residual toner may scatter.
Remove the new toner cartridge and, without tilting it, vigorously shake it up, down and sideways five or six times. If the interior toner contains clumps, the machine may produce a strange sound during operation.
Do not repeatedly install and remove toner cartridges. This will result in toner leakage.
Follow the instruction on the screen regarding how to replace a toner cartridge.
If “Toner Cartridge is almost empty.” appears, the toner has almost run out. Have a replacement toner cartridge at hand.
If appears when there is a lot of toner, follow the toner replacement instructions that appear on the screen. Pull out the cartridge, and then reinstall it.
You can check the name of the required toner and the replacement procedure using the [Add Toner] screen.
For details about how to check contact number where you can order supplies, see Inquiry.