General Features

You can select whether Auto Image Density is "on" or "off" when the machine is turned off, reset, or modes are cleared.

Default for [Text]: [On]

Default for [Drawing]: [On]

Default for [Text / Photo]: [On]

Default for [Photo]: [Off]

Default for [Generation Copy]: [On]

Default for [Highlight Pen]: [Off]

Default for [Background Lines]: [On]

Default for [Patched Original]: [On]

You can specify which original photo type has priority when you select [Text / Photo] or [Photo].

Default for [Text / Photo]: [Printed Photo]

Default for [Photo]: [Printed Photo]

The maximum copy quantity can be entered between 1 and 99.

Default: [99 sheet(s)]

If you load paper of the same size in two or more trays, the machine automatically shifts to the other when the first tray runs out of paper (when [Auto Paper Select] is selected). This function is called "Auto Tray Switching". This setting specifies whether to use Auto Tray Switching or not.

Default: [With Image Rotation]

• With Image Rotation

  Use to copy when using the Auto Tray Switching function.

• Without Image Rotation

  Only copies with Auto Tray Switching if you load paper of the same size and in the same orientation in two or more trays. If the paper is not the same size and in the same orientation, copying is interrupted and the message that prompts you to add paper to the tray will be displayed.

• Off

  When a paper tray runs out of paper, copying is interrupted and the message that prompts you to add paper to the tray will be displayed.

You can select whether or not to sound a buzzer when a copy is completed.

If [Panel Key Sound] of [General Features] ([System Settings]) is turned on, the machine beeps to notify you that it did not complete a job for reasons such as copying was interrupted, the paper tray ran out of paper, or a paper jam occurred.

Default: [On]

You can specify whether or not to display the setting screen for paper sizes or types whenever you press [].

If you select [Display Automatically], the paper setting screen is displayed whenever you press []. If you select [Do not Display], the paper setting screen is displayed when you press [] and the [] key.

Default: [Display Automatically]