Previous
User Stamp is used to register an image that is used as a user stamp.
The size range for stamp images is 10–297 mm (0.4–11.7 inches) wide and 10–432 mm (0.4–17.0 inches) high. However, if the stamp's size exceeds the maximum value of the area (5000 mm2, 7.75 inch2), it will be automatically corrected to a size that is within the range of the area.
: Horizontal size
: Vertical size
Up to 40 frequently used images can be stored in memory.
Press the [User Tools/Counter] key.
Press [Copier / Document Server Features].
Press [Stamp].
Press [User Stamp].
Press [Program / Delete Stamp].
Press [Select Stamp].
Press the stamp number you want to program.
Enter the user stamp name (up to 10 characters) with the letter keys, and then press [OK].
Enter the horizontal size of the stamp with the number keys, and then press [
].
Enter the vertical size of the stamp with the number keys, and then press [].
Place the original for user stamp.
Press [Start Scanning].
Press the [User Tools/Counter] key.
If the stamp number is already being used, the machine will ask you if you want to overwrite it. Press [Yes] or [Stop].
You cannot restore the overwritten stamp.
Stamp numbers with
already have settings in them. Stamp numbers that are not registered yet are marked with "Not Programmed".If the stamp is red or bright red, it may not be scanned clearly. To store a user stamp clearly, use a black ink stamp, or make a copy and use that as the original.
For details about how to enter text, see "Entering Text", Getting Started.
