Previous
Press [Original Feed Type].
Press [Batch] or [SADF]
To scan originals using the exposure glass, select [Batch]. To scan originals using the ADF, select [SADF]. For detail about [Batch] and [SADF], see Batch,SADF.
Press [OK].
Place originals.
Make settings for sending or storing.
Press [Start] to scan originals.
If [Batch] is selected, place additional originals, and then press [Start].
If [SADF] is selected, scanning starts automatically when you place additional originals in the ADF.
Place subsequent originals after the originals have been scanned.
After all originals are scanned, press [
].
Storing or transmission starts.
