Previous
Configuration:
Desktop
Hard disk:
320 GB
Photosensitivity type:
OPC drum
Original scanning:
One-dimensional solid scanning system through CIS
Copy process:
Laser beam scanning and electro-photographic printing
Development:
Dry two-component magnetic brush development system
Fusing:
Heating roll pressure system
Resolution:
Scanning:
Exposure glass: 600 × 600 dpi
ADF: 600 × 300 dpi, 600 × 600 dpi
Printing:
600 × 600 dpi
Exposure glass:
Stationary original exposure type
Original reference position:
Rear left corner
Warm-up time (23°C (73.4°F), rated voltage)
53 seconds (If [Screen Startup Mode] is set to [Normal])
30 seconds (If [Screen Startup Mode] is set to [Quick])
Originals:
Sheet, book, three-dimensional object
Maximum original size:
Exposure glass: 297 × 216 mm (11.7 × 8.5 inches)
ADF: 297 × 1,260 mm (11.7 × 49.7 inches)
Paper size:
Trays 1–2 and the bypass tray:
For details, see Recommended Paper Sizes and Types.
Duplex (Tray 1, Tray 2):
A4
, A5
, 81/2 × 11, 51/2 × 81/2Duplex (Bypass tray):
A3
, A4, A5, B4, B5, 11 × 17, 81/2 × 14, 81/2 × 11, 51/2 × 81/2, 8K, 16K, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/2 × 132/5custom size: Vertical: 90.0-297.0 mm (3.54-11.7 inches), Horizontal: 148.0-600.0 mm (5.83-23.6 inches)
Paper weight:
Trays 1–2 and the bypass tray: For details, see Recommended Paper Sizes and Types.
Duplex: 60–90 g/m2 (16 lb. Bond–50 lb. Index)
For details about and recommendations concerning thick paper, see Thick paper.
Missing image area (Copier):
For details, see Missing image area.
First copy/print time:
4.8 seconds
(A4, 81/2 × 11, 100% reproduction, feeding from Tray 1,on the exposure glass)
Copy/print speed:
30 sheets/minute (A4
, 81/2 × 11), (Normal Mode)15 sheets/minute (A4
, 81/2 × 11), (Silent Mode)
Reproduction ratio:
(mainly Europe and Asia)Preset reproduction ratios (%):
Enlargement: 200, 141, 122
Full size: 100
Reduction: 93, 82, 71, 50
(mainly North America)Preset reproduction ratios (%):
Enlargement: 155, 129, 121
Full size: 100
Reduction: 93, 78, 65, 50
Zoom: From 25–400% in increments of 1%
Maximum continuous copy run:
99 sheets
Paper capacity (80 g/m2, 20 lb. Bond):
For details, see Recommended Paper Sizes and Types.
Power requirements:
- (mainly Europe and Asia)
220–240 V, 5 A, 50/60 Hz
- (mainly North America)
120–127 V, 9 A, 60 Hz
Power consumption:
- (mainly Europe and Asia)
Main unit only
Specification
Ready
83.5 W
During printing
455 W
Maximum
1,140 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Specification
Maximum
1,140 W or less
The complete system consists of the main unit and paper tray unit.
- (mainly North America)
Main unit only
Specification
Ready
79.1 W
During printing
455 W
Maximum
1,180 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Specification
Maximum
1,180 W or less
The complete system consists of the main unit and paper tray unit.
Dimensions:
W × D × H up to ADF:
350 × 493 × 505 mm (13.8 × 19.4 × 19.9 inches)
Space for main unit (W × D) (including the bypass tray):
780 × 665 mm (30.7 × 26.2 inches) (when the control panel is horizontal)
Noise emission:
Sound power level:
Main unit only
Specification
Stand-by
29.2 dB (A)
Copying
56.4 dB (A)
Complete system
Specification
Stand-by
29.4 dB (A)
Copying
61.5 dB (A)
Sound pressure level:
Main unit only
Specification
Stand-by
20.0 dB (A)
Copying
47.9 dB (A)
Complete system
Specification
Stand-by
20.4 dB (A)
Copying
51.8 dB (A)
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
The complete system consists of the main unit and paper tray unit.
Weight:
Approx. 32 kg (70.4 lb.)
In silent mode, copying is slower.
