Skip header
 

Starting an Extended Feature from Web Image Monitor

1Display the [Configuration] menu of Web Image Monitor.

2In "Extended Feature Settings", click [Startup Setting].

3Select the extended features you want to start, whose status is "Stop", "Suspend", or "Ending". Select the radio button at the "Selection" in the list.

Web browser screen illustration

4Click [Start Up/Stop].

Depending on the type and status of the extended features you select, the machine responds as follows:

Type-J extended features

  • When the Type-J extended feature icons are displayed on the [Home] screen:

    The extended feature's "Status" does not change to "Starting Up" while the Extended Feature Settings screen is displayed. Start the extended feature from the [Home] screen when its "Status" is "Suspend".

    • If "Suspend" is displayed:

      Press the extended feature's icon on the [Home] screen on the control panel to start the feature.

    • If "Stop" is displayed:

      The extended feature's "Status" changes to "Suspend". Press the extended feature's icon on the [Home] screen on the control panel to start the feature.

  • When the Type-J extended feature icons are not displayed on the [Home] screen:

    The extended feature's "Status" changes from "Stop" to "Starting Up".

Type-C extended features

  • If "Ending" is displayed:

    The extended feature's "Status" changes to "Starting Up".

  • If "Stop" is displayed:

    The extended feature's "Status" changes to "Waiting".

    After the machine is rebooted, the "Status" changes to "Starting Up".

    If you select the same extended feature and click [Start Up/Stop] again without rebooting, the "Status" changes back to "Stop".

5Click [Back].

Note