Skip header
 

Distributing Data Using Distributed Scan Management

Configure the distributed scan management (DSM) system on Windows Server.

For the procedure to configure DSM, see Windows Server Help.

1Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

2Flick the screen to the left, and then press the [Scanner] icon on Home screen 4.

3Login to the machine using Windows authentication.

4Make sure that no previous settings remain.

If a previous setting remains, press [Reset].

5Press [DSM Destination].

6Place originals.

7If necessary, specify the scan settings according to the original to be scanned.

To change the scan settings, select the [Allow value override at scanner] check box when configuring the device on Windows Server.

8Specify the destination.

9Press [Start].

Note

  • Up to 100 destinations can be displayed in [DSM Destination]. If more than 100 scan processes (destinations) are registered to Windows Server, information for the 100 processes that have been registered recently will be displayed in [DSM Destination].

  • The program function cannot be used with DSM.

PreviousNext