Skip header
 

Resuming a Print Job from the Bypass Tray

If either [Any Size/Type] or [Any Custom Size/Type] is selected for [Tray Setting Priority] in the [System] tab under [Printer Features] on the Bypass Tray and the size or type of paper loaded in the tray does not match the paper settings specified for the job, an error message appears on the control panel. Use the following procedure to resume the print job from the Bypass Tray if the error message appears.

1Load the paper that is displayed on the control panel into the Bypass Tray.

2Press [OK].

Note

  • For details about the items that can be configured, see System.