Wireless Direct Settings

If the Wireless Direct Settings are enabled, the control panel can be used as a DHCP server. When the client on a network starts, the information such as an IP address that is required for network connection is assigned automatically.

Default: [OFF]

Configure all the following items to enable this function:

• Device name

  Press [RENAME DEVICE] on the top right of the screen, and then enter the name of the device connected to the client.

• Group Owner Mode

  Specify whether or not to enable group owner mode. When this setting is disabled, easy connection mode is enabled.

  Default: [OFF]

• Connection Password

  Enter the password for connecting to a network.

• DHCP Server IP Address

  Enter the IP address of the control panel used as an access point by the client.

• DHCP IP Address Range

  Enter the range of the IP address assigned to the client. The IP address assigned to the client is effective for one hour.

• Select Channel

  Select the channel for direct connection from 1 to 11.

  Default: [ch6]