Skip header
 

Guide to Components Region B icon(mainly North America)

CAUTION


  • Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal components.

Front and right view

Main unit illustration numbered callout illustration

  1. ADF

    Lower the ADF over originals placed on the exposure glass.

    If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.

  2. Exposure glass

    Place originals face down here.

  3. Control panel

    See Guide to the Names and Functions of the Machine's Control Panel.

  4. Front cover

    Open to replace the toner cartridge.

  5. Paper tray

    Load paper here.

  6. Paper tray unit

    Load paper here.

  7. Vents

    Prevent overheating.

  8. Main power switch

    To operate the machine, the main power switch must be on. If it is off, turn the switch on.

  9. Bypass tray

    Use to copy or print on OHP transparencies and label paper (adhesive labels).

  10. Extender

    Pull this extender out when loading A4Landscape, 81/2 × 11Landscape or larger size paper in the bypass tray.

  11. Paper guides

    When loading paper in the bypass tray, align the paper guides flush against the paper.

  12. Lower right cover

    Open this cover when a paper jam occurs.

  13. Right cover

    Open this cover when a paper jam occurs.

Front and left view

Main unit illustration numbered callout illustration

  1. Internal tray guide

    Open out and raise the end fence to support large paper.

  2. Internal tray 2

    If you select this as the output tray, copied/printed paper or fax messages are delivered here face down.

  3. Internal tray

    Copied/printed paper and fax messages are delivered here.

  4. ADF's extenders

    Raise these extenders to support large paper.

Rear and left view

Main unit illustration numbered callout illustration

  1. Vents

    Prevent overheating.