Skip header
 

Copying from the Bypass Tray

Use the bypass tray to copy onto OHP transparencies, adhesive labels, translucent paper, and paper that cannot be loaded in the paper trays.

About how to load paper in the bypass tray, see Paper Specifications and Adding Paper for details.

Important

  • The Duplex function cannot be performed on paper fed from the bypass tray. If [1 sided 2 sided:TtoT] is selected, cancel the setting. You can also change the initial settings. For details, see "Changing the Default Functions of the Initial Screen", Convenient Functions.

If the paper type you want to copy onto is not shown on the [Paper Type] screen, you must specify the paper type under [Tray Paper Settings] in User Tools. For details about [Tray Paper Settings], see "Tray Paper Settings", Connecting the Machine/ System Settings.

Bypass Tray Usage

Press [Bypass Tray Usage] on the [Bypass Tray Paper] screen to display an explanation about the originals and paper orientation.

Operation panel screen illustration

1Load the paper face down in the bypass tray.

The bypass tray (Operation panel screen illustration) is automatically selected.

2Press [Sharp].

3Press [Paper Size].

4Specify the size of the paper, and then press [OK].

5Press [Paper Type].

6Specify the type of the paper as necessary, and then press [OK] twice.

7Place the originals, and then press [Start].

8When the copy job is finished, press [Reset] to clear the settings.

Note

  • If you specify [Display Automatically] for [Paper Settings Screen for Bypass], you can display the [Bypass Tray Paper] screen by pressing [Operation panel screen illustration] instead of pressing [Sharp]. For details, see General Features.

  • If the bypass tray is not automatically selected, press [Operation panel screen illustration].

  • Region A icon(mainly Europe and Asia) Only A4Landscape size paper can be fed from the bypass tray while you use the quick copy function.

  • Region B icon(mainly North America) Only 81/2 × 11Landscape size paper can be fed from the bypass tray while you use the quick copy function.