Right drawer unit

Open the front cover of the right unit.

Pull down the lever C2 and pull out the right drawer until it stops.

Remove the two screws and then remove the cover plate.

Remove the two screws and then remove the dust catcher.

Use a clean dry cloth to remove any dust remaining in the dust catcher.

Reattach the dust catcher with the two screws.

Reattach the cover plate with the two screws.

Push the right drawer into the main unit until it stops, and then pull up the lever C2.

Open the plates.

Clean the rollers, sensors, and guide plates.

Close the plates opened in Step 9.

Close the front covers.